Wednesday - May 24, 2006
SESSION 1A |
SESSION
1B |
AUTOMOTIVE SPRAYS (Room: Mountbatten Salon A) |
SPRAY MODELING-1
(Room: Mountbatten Salon B) |
9:00 am |
Characterization of an Electrostatically Charged GDI Spray
Eric K. Anderson, Univ. Illinois Urbana-Champaign, A. Paolo Carlucci,
Univ. of Lecce, Arturo de Risi, Univ. of Lecce, Dimitrios C. Kyritsis,
Univ. Illinois at Urbana-Champaign |
Modeling reaction rates in two-phase flows using assumed-PDF
methods: An evaluation using Direct Numerical Simulation
Josette Bellan, Jet Propulsion Laboratory and California Institute of
Technology, Laurent Selle, California Institute of Technology |
9:25 am |
Real-Time Imaging of Fuel Injection, Ignition and Combustion
in a Direct-Injected Spark-Ignition Engine
James D. Smith, The University of Michigan, Volker Sick, The University
of Michigan |
Spatial Error and Artful Dodges in Lagrangian/Eulerian Spray
Simulation
Michael O'Brien, University of Massachusetts, Shuhai Hou, Caterpillar
Inc. David P. Schmidt, University of Massachusetts |
9:50 am |
A Comparison of Three Direct Injection Multi-Orifice Nozzles
by Ultrafast X-Tomography
Xin Liu, Argonne National Laboratory, Jin Wang, Argonne National Laboratory,
David L.S. Hung, James R. Winkelman, Visteon Corporation |
Droplet Vaporization in a Supercritical Environment
Mario F. Trujillo, ARL Pennsylvania State University, David J. Torres,
Los Alamos National Laboratory |
SESSION
2A |
SESSION
2B |
ATOMIZATION-1
(Room: Mountbatten Salon A) |
DIESEL-1
(Room: Mountbatten Salon B) |
10:30 am |
Three Types of Theories Predicting the Onset of Atomization
and Liquid Breakup
S.P. Lin, Clarkson University |
Diesel Sprays Through Multi-hole Micro-Nozzles: Spray Dynamics
and Structure
Prashanth Ravi, University of Wisconsin, Madison, Mike Corradini and
Jake Blanchard, University of Wisconsin-Madison |
10:55 am |
A Model for the Penetration of a Liquid Jet in Crossflow
A. Mashayek, A. Jafari and N. Ashgriz, Department of Mechanical and
Industrial Engineering, University of Toronto |
Effects of Nozzle Geometry on Cone Angles of High-Pressure
Diesel Sprays in Near-Nozzle Region
Seong-Kyun Cheong, Argonne National Laboratory, Christopher F. Powell,
Kyoung-su Im, Xin Liu and Jin Wang, Argonne National Laboratory, Ming-Chia
Lai, Wayne State University |
11:20 am |
Near Field Behavior of a Liquid Jet in a Crossflow
Christopher Brown, Energy Research Consultants, Vincent McDonell, Energy
Research Consultants |
Modeling Charge Preparation in Diesel HCCI Engines Using Low
Pressure Injection
Yong Sun, University of Wisconsin-Madison, Rolf D. Reitz,University of
Wisconsin-Madison |
11:45 am |
On the break-up regime map of liquid jet in crossflow
Ravi K. Madabhushi, United Technologies Research Center, May Y Leong,
Marco Arienti, United Technologies Research Center, Christopher T.
Brown and Vincent G. McDonell, Energy Research Consultants
|
Optimization of Diesel Engines by Means of Multi-Orifice Asynchronous
Fuel Injection
Franz X. Tanner, Michigan Technological University, Seshasai Srinivasan,
Michigan Technological University |
SESSION
3A |
SESSION
3B |
|
|
FILM ATOMIZATION
(Room: Mountbatten Salon A) |
IMPINGING SPRAYS
(Room: Mountbatten Salon B) |
|
1:30 pm |
|
|
Atomization in
Gas-Centered Swirl-Coaxial Injectors
Malissa D.A.
Lightfoot, Air Force Research Laboratory, Stephen A. Danczyk and Douglas G.
Talley, The Air Force Research Laboratory |
Spray impact
onto a curved surface: modelling, scaling, simulation
Kristian Horvat, Technische Universitaet
Darmstadt, Ilia Roisman, Cam Tropea, Technische Universitaet Darmstadt |
|
1:55 pm |
|
|
Characterization
of shear-driven liquid film separation and break-up at a sharp expanding
corner
M. A. Friedrich, University of
Missouri-Rolla, H. Lan, J. A. Drallmeier and B. F. Armaly, University of
Missouri-Rolla |
A Numerical
Investigation of Impinging Jets
Nathaniel Barlow, Clarkson University, Brian Helenbrook, Sung Lin |
|
2:20 pm
Poster Session |
3:00pm
Break, Exhibits, Posters
Breaks in room: Churchill Court - Sponsored by
Auto21, Canada
Exhibition room: Churchill Ballroom A
SESSION 4A |
SESSION 4B |
DIAGNOSTICS-1
(Room: Mountbatten Salon A) |
SECONDARY ATOMIZATION
(Room: Mountbatten Salon B) |
3:25 pm |
New
sophisticated developments in laser diffraction equipment
Henrik G. Krarup, Malvern Instruments |
Detailed
understanding of secondary atomization using the volume of fluid method
Sachin Khosla, Clifford E. Smith, CFD Research
Corporation, Ryan Throckmorton, Virginia Tech |
3:50 pm |
A Novel Device
For Investigating Multiple Scattering In Spray
Joshua Powell, University of Illinois at
Urbana-Champaign, Chia-Fon Lee, University of Illinois at Urbana-Champaign |
Internal Flows in
Fluidic Spray Control
Kuotung Tseng, Purdue University, Steven H. Collicott, Purdue University |
4:15 pm |
Pressure Effects
on Drop Diameters and Surface Areas in Oil Nozzles
Yudaya Sivathanu, En'Urga Inc., Jongmook
Lim, En'Urga Inc. Henrik Linden, Danfoss
A/S, Preben Noerskov, Danfoss A/s |
Producing
Droplets Smaller than the Nozzle Diameter by using a Pneumatic Droplet
Generator
Afsoon Amirzadeh Goghari, University of
Toronto, Sanjeev Chandra, University of Toronto |
Thursday, May 25, 2006
SESSION
1A |
SESSION
1B |
AUTOMOTIVE SPRAYS
(Room: Mountbatten Salon A) |
SPRAY MODELING-1
(Room: Mountbatten Salon B) |
9:00 am |
Characterization of an Electrostatically Charged GDI Spray
Eric K. Anderson, Univ. Illinois Urbana-Champaign, A. Paolo Carlucci,
Univ. of Lecce, Arturo de Risi, Univ. of Lecce, Dimitrios C. Kyritsis,
Univ. Illinois at Urbana-Champaign |
Modeling reaction rates in two-phase flows using assumed-PDF
methods: An evaluation using Direct Numerical Simulation
Josette Bellan, Jet Propulsion Laboratory and California Institute of
Technology, Laurent Selle, California Institute of Technology |
9:25 am |
Real-Time Imaging of Fuel Injection, Ignition and Combustion
in a Direct-Injected Spark-Ignition Engine
James D. Smith, The University of Michigan, Volker Sick, The University
of Michigan |
Spatial Error and Artful Dodges in Lagrangian/Eulerian Spray
Simulation
Michael O'Brien, University of Massachusetts, Shuhai Hou, Caterpillar
Inc. David P. Schmidt, University of Massachusetts |
9:50 am |
A Comparison of Three Direct Injection Multi-Orifice Nozzles
by Ultrafast X-Tomography
Xin Liu, Argonne National Laboratory, Jin Wang, Argonne National Laboratory,
David L.S. Hung, James R. Winkelman, Visteon Corporation |
Droplet Vaporization in a Supercritical Environment
Mario F. Trujillo, ARL Pennsylvania State University, David J. Torres,
Los Alamos National Laboratory |
SESSION
2A |
SESSION
2B |
ATOMIZATION-1
(Room: Mountbatten Salon A) |
DIESEL-1
(Room: Mountbatten Salon B) |
10:30 am |
Three Types of Theories Predicting the Onset of Atomization
and Liquid Breakup
S.P. Lin, Clarkson University |
Diesel Sprays Through Multi-hole Micro-Nozzles: Spray Dynamics
and Structure
Prashanth Ravi, University of Wisconsin, Madison, Mike Corradini and
Jake Blanchard, University of Wisconsin-Madison |
10:55 am |
A Model for the Penetration of a Liquid Jet in Crossflow
A. Mashayek, A. Jafari and N. Ashgriz, Department of Mechanical
and Industrial Engineering, University of Toronto |
Effects of Nozzle Geometry on Cone Angles of High-Pressure
Diesel Sprays in Near-Nozzle Region
Seong-Kyun Cheong, Argonne National Laboratory, Christopher F. Powell,
Kyoung-su Im, Xin Liu and Jin Wang, Argonne National Laboratory, Ming-Chia
Lai, Wayne State University |
11:20 am |
Near Field Behavior of a Liquid Jet in a Crossflow
Christopher Brown, Energy Research Consultants, Vincent McDonell, Energy
Research Consultants |
Modeling Charge Preparation in Diesel HCCI Engines Using
Low Pressure Injection
Yong Sun, University of Wisconsin-Madison, Rolf D. Reitz,University of
Wisconsin-Madison |
11:45 am |
On the break-up regime map of liquid jet in crossflow
Ravi K. Madabhushi, United Technologies Research Center, May Y Leong,
Marco Arienti, United Technologies Research Center, Christopher T. Brown
and Vincent G. McDonell, Energy Research Consultants
|
Optimization of Diesel Engines by Means of Multi-Orifice
Asynchronous Fuel Injection
Franz X. Tanner, Michigan Technological University, Seshasai Srinivasan,
Michigan Technological University |
SESSION
3A |
SESSION
3B |
|
|
FILM ATOMIZATION
(Room: Mountbatten Salon A) |
IMPINGING SPRAYS
(Room: Mountbatten Salon B) |
|
1:30 pm |
|
|
Atomization in Gas-Centered Swirl-Coaxial Injectors
Malissa D.A. Lightfoot, Air Force Research Laboratory, Stephen
A. Danczyk and Douglas G. Talley, The Air Force Research Laboratory |
Spray impact onto a curved surface: modelling, scaling, simulation
Kristian Horvat, Technische Universitaet Darmstadt, Ilia Roisman, Cam
Tropea, Technische Universitaet Darmstadt |
|
1:55 pm |
|
|
Characterization of shear-driven liquid film separation and
break-up at a sharp expanding corner
M. A. Friedrich, University of Missouri-Rolla, H. Lan, J. A. Drallmeier
and B. F. Armaly, University of Missouri-Rolla |
A Numerical Investigation of Impinging Jets
Nathaniel Barlow, Clarkson University, Brian Helenbrook, Sung Lin |
SESSION
4A |
SESSION
4B |
DIAGNOSTICS-1
(Room: Mountbatten Salon A) |
SECONDARY ATOMIZATION
(Room: Mountbatten Salon B) |
3:25 pm |
New sophisticated developments in laser diffraction equipment
Henrik G. Krarup, Malvern Instruments |
Detailed understanding of secondary atomization using the
volume of fluid method
Sachin Khosla, Clifford E. Smith, CFD Research Corporation, Ryan Throckmorton,
Virginia Tech |
3:50 pm |
A Novel Device For Investigating Multiple Scattering In Spray
Joshua Powell, University of Illinois at Urbana-Champaign, Chia-Fon Lee,
University of Illinois at Urbana-Champaign |
Internal Flows in Fluidic Spray Control
Kuotung Tseng, Purdue University, Steven H. Collicott, Purdue University |
4:15 pm |
Pressure Effects on Drop Diameters and Surface Areas in Oil
Nozzles
Yudaya Sivathanu, En'Urga Inc., Jongmook Lim, En'Urga Inc. Henrik Linden,
Danfoss A/S, Preben Noerskov, Danfoss A/s |
Producing Droplets Smaller than the Nozzle Diameter by using
a Pneumatic Droplet Generator
Afsoon Amirzadeh Goghari, University of Toronto, Sanjeev Chandra, University
of Toronto |
Friday, May 26, 2006
SESSION
1A |
SESSION
1B |
DIESEL-2
(Room: Mountbatten Salon A) |
NUMERICAL TECHNIQUES
(Room: Mountbatten Salon B) |
8:00 am |
Near-Nozzle Diesel Spray Imaging Using X-Rays
Amaury Malav, Univesity of Wisconsin-Madison, Patrick Farrell, Engine
Research Center, Department of Mechanical Engineering, University of
Wisconsin-Madison,
Christopher F. Powell, Energy Systems Division, Seong-kyun Cheong
and Jin Wang,
Advanced Photon Source, Argonne National Laboratory, Argonne, IL |
Simulating Two-Phase Flows Using the Refined Level Set Grid
Method
Marcus Herrmann, Stanford University |
8:25 am |
Spray and Combustion Visualization Within an Optical HSDI
Diesel Engine under Different Injection Included Angles
Tiegang Fang, Robert E. Coverdill, Chia-fon F. Lee* and Robert
A. White, Department of Mechanical and Industrial Engineering, University
of Illinois at Urbana-Champaign |
Numerical Investigation of Parameters Influencing Droplet
Rebound
Samuel B. Johnson,, Jean-Pierre Delplanque, University of California
Davis |
8:50 am |
Fuel Spray and Impingement Measurements in a Heated High
Pressure Chamber
Bo Yang, University of Wisconsin-Madison, Jaal Ghandhi, University
of Wisconsin-Madison |
A new method in calculating interface normal vectors and
curvatures in modeling free-surface flows
Mehdi Raessi, University of Toronto, Javad Mostaghimi and Markus Bussmann,
University of Toronto |
SESSION
2A |
SESSION
2B |
PHARMACEUTICAL SPRAYS
(Room: Mountbatten Salon A) |
ATOMIZATION-2
(Room: Mountbatten Salon B) |
|
|
9:30 am |
High-Magnification Shadowgraphy Characterization of Rotary
Atomizer Droplet Production for Pharmaceutical Applications
C. Varga and H. Snyder, Nektar Therapeutics |
Atomization of Wall-Bounded Two-Phase Flows
Malissa D.A. Lightfoot, Air Force Research Laboratory, |
9:55 am |
Sampling of High Flow Rate Electrospray Ionization for Liquid
Chromatography-Mass Spectrometry
Serguei Savtchenko, IONICS Mass Spectrometry Group, Lisa Cousins,
Reza Javahery, Charles Jolliffe, Ilia Tomski, IONICS Mass Spectrometry
Group |
Computational Investigation of the effect of velocity modulation
on low-velocity round liquid jets
Vedanth Srinivasan, Department of Mechanical Engineering, University
of Kentucky, Abraham J. Salazar,Kozo Saito, Department of Mechanical
Engineering, University of Kentucky
|
SESSION
3A |
SESSION
3B |
DROPLET IMPACT-2
(Room: Mountbatten Salon A) |
INDUSTRIAL-2
(Room: Mountbatten Salon B) |
|
|
10:30 am |
Modeling the influence of gas pressure on droplet impact
using a coupled gas/liquid boundary element method
Hongbok Park, Purdue University, Sam S. Yoon, Korea University,
Richard A. Jepson, Sandia National Lab, Steven D. Heister, Purdue
University |
Pneumatic Atomization of a Viscous Solution for Spray Drying:
Investigation of Droplet and Particle Formation.
John Hecht, Procter & Gamble, Jason Stamper, Procter & Gamble
Ken Giles, University of California, Davis
|
10:55 am |
Effects of Air on Splashing During a Droplet Impact
Richard A. Jepsen, Mechanical Environments, Sandia National Labs, Sam
S. Yoon, Mechanical Engineering Department, Korea University, Byron Demosthenous,
Applied Diagnostics, Sandia National Labs |
Improving the stability of a gas-liquid spray by modifying
the two-phase flow entering the nozzle
Solange Maldonado, University of Alberta, Brian A. Fleck, Ted Heidrick
and Alidad Amirfazli, University of Alberta, Brian Knapper and Edward
Chan, Syncrude Canada Limited
|
11:20 am |
Spreading of Plasma-Sprayed Molybdenum Particles on Glass
and Metal Substrates
Andre McDonald, University of Toronto, Sanjeev Chandra, University of
Toronto, Mario Lamontagne and Christian Moreau, Industrial Materials
Institute, NRC |
Injection of preheated dodecane through a transparent converging-diverging
nozzle
S. A. G. Watson and S. McCahan |
SESSION
4A |
SESSION
4B |
SIMULATIONS-2
(Room: Mountbatten Salon A) |
SPRAY APPLICATIONS
(Room: Mountbatten Salon B) |
11:45 am |
3D Simulation of Flow in Pressure-Swirl Atomizers
Ashraf A. Ibrahim, University of Cincinnati, Milind A. Jog and
S. M. Jeng, University of Cincinnati |
Deviations from the log-normal distribution – effects
of viscosity
T. Fredrik Engström and Magnus Marklund |
12:10 pm |
Numerical based equations for drop detachment phenomenon
A. Moradian and J. Mostaghimi |
Effect of Viscosity on the Breakup Length of Liquid Sheets
Formed by Splash Plate Nozzles
M. Ahmed, University of Toronto, N. Ashgriz, H. Tran |
12:35 pm |
|
Characteristics of Powders Produced in Spray Drying and
Spray Pyrolysis
Morteza Eslamian, University of Toronto, Nasser Ashgriz, University of
Toronto |
POSTER SESSIONS
-
Spraying electically insulating liquids using electrostatic
atomizers
John Shrimpton Department of Mechanical Engineering, Imperial College London,
Farzad Mashayek, Department of Mechanical & Industrial Engineering
University of Illinois at Chicago, IL, USA
-
Interferometric Particle Imaging of liquid jets in crossflows
Ali Mashayek, Amir Amighi and Nasser Ashgriz, Department of Mechanical
and Industrial Engineering, University of Toronto, Toronto, Canada
-
Experimental Study on Printing Process in Offset Inkjet Printers
Ri Li, Nasser Ashgriz, Sanjeev Chandra, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, ON, Canada,
John R. Andrews, Xerox Corporation, Wilson Center for Research & Technology,
Webster, NY, USA
-
Simulation Analysis of Particle Collision Process with quasi-Particle
by Molecular Dynamics Method
T.Okamoto *, H.Minami and Y.Tsuchiya, Department of Applied Science, Faculty
of Engineering, Tokai University, Japan
- Investigating effects of neighbor droplets on heat transfer
using an Assumed Point Field formalism
Madhusudan Pai, Rahul Garg and Shankar Subramaniam, Department of Mechanical
Engineering, Iowa State University, IA, USA
*Corresponding author
|